Writing Text; Insert Date; Insert Time; Counter - Scanprobe Maxprobe User Manual

The Maxprobe CCU will automatically record audio if you plug a microphone into the
microphone socket in the CCU front. To hear the audio on a recording during playback
through the Maxprobe CCU, you will need to plug in a speaker or a set of headphones
into the headphones socket.

Writing Text

Text can be added to the recording by pressing one of the number keys to select the
relevant page. The page number will be displayed on the right-hand side of the screen. To
edit the text, press the "Text Overlay" key with a page selected. The size of the text can be
changed by pressing the "Text Size" button, and the font and colour can be changed by
pressing the "Text Font" button. The text box can be moved around the screen using the
arrow keys. Once the text editing is complete and the text box is correctly positioned, press
the "OK" button to 'stamp' the text into the video
Note
If the "OK" button is not pressed, the text will not be stamped on the screen and
will not appear on your recording.

Insert Date

Press the number of the page you wish to add the date to then press <CTRL> and <D>.
The size of the text can be changed by pressing the "Text Size" button, the font and colour
can be changed by pressing the "Text Font" button, and the text position on the screen can
be changed by pressing the <SHIFT> key and using the arrow keys.
Press the "OK" button to stamp the date onto the screen.

Insert Time

Press the number of the page you wish to add the date to then press <CTRL> and <T>. The
size of the text can be changed by pressing the "Text Size" button, the font and colour can
be changed by pressing the "Text Font" button, and the text position on the screen can be
changed by pressing the <SHIFT> key and using the arrow keys.
Press the "OK" button to stamp the date onto the screen.

Counter

Press the number of the page you wish to add the date to then press the "Meterage
Placement" button. The size of the text can be changed by pressing the "Text Size" button,
the font and colour can be changed by pressing the "Text Font" button, and the text position
on the screen can be changed by pressing the <SHIFT> key and using the arrow keys.
Press the "OK" button to stamp the date onto the screen.

Counter Reset

Press and hold the "Meterage Counter Reset" button for 3 seconds to reset the counter to
zero.
Maxprobe User Manual
Version 2.0
22 November 2023
35