Battery Operating And Charging Temperatures; Battery Damage; Lithium Battery Shipping - Scanprobe Maxprobe User Manual

electrolyte is frozen. If the Maxprobe CCU is used in cold weather or stored in cold
temperatures (e.g. overnight in a vehicle in sub-zero temperatures), always allow the CCU to
warm up before charging.

Battery Operating and Charging Temperatures

Operating Temperature:
Charging Temperature:

Battery Damage

The battery is protected within the Maxprobe CCU case and is not exposed to the user in
normal operations. If the case is damaged and the battery pack is exposed:
•
Return the Maxprobe CCU to Scanprobe Techniques Limited, or an approved
service centre, for repairs. Never use or charge a Maxprobe CCU if it has an
exposed battery pack.
•
Do not tamper with an exposed battery pack.
•
Do not short-circuit a cell or the battery, or store a cell or the battery pack where
it may be short-circuited by other metal objects.
•
Do not dismantle, open, or shred the cells or batteries.
•
Do not subject cells or batteries to mechanical shock.
•
In the event of a cell leaking, do not allow the liquid to come in contact with the
skin or eyes. If contact has been made, wash thoroughly with clean water and
seek immediate medical advice.
•
Do not expose cells or batteries to heat or fire. Avoid storage of exposed
batteries in direct sunlight.
•
Seek medical advice immediately if a cell or a battery has been swallowed.
•
Keep exposed cells and batteries clean and dry.
To ensure the batteries are kept in the best condition, do not use any charger except the one
specifically supplied with the equipment and do not leave the equipment on prolonged
charge when not in use.

Lithium Battery Shipping

The Maxprobe lithium ion battery pack, uses lithium-ion cells and are subject to shipping
regulations. Certification for the requirements of UN38.3 can be provided by Scanprobe
Techniques Ltd. The Maxprobe battery falls below 100Wh.
-20°C to +60°C
+10°C to +45°C
Maxprobe User Manual
Version 2.0
22 November 2023
23