Set Concentration Unit; Allow Use Of Multiple Reagent Volumes - Qiagen QIAgility User Manual

Set concentration unit

A concentration unit can be assigned to make concentration values in the run more meaningful when presented in forms and in
reports. The assigned unit does not change the way in which concentrations are handled or constructed.
The available concentration units are:
Default (none) — no concentration unit

Copies/ µL (copies per microliter)

Copies/mL (copies per milliter)

% (percentage)

IU/µL (international unit/microliter)

IU/µL (international unit/milliliter)

ng/µL (nanogram/microliter)

µg/µL (microgram/microliter)

mg/mL (milligram/milliliter)

pg/mL (picogram/microliter)

$/µL (dollars/microliter)

Custom (user-defined)


Allow use of multiple reagent volumes

When activated a tick is visible.
If activated, the user sees the advanced reagents table in the reaction configuration form. This allows the user to configure the
volume of a reagent for each reaction separately (instead of using the default volumes).
If deactivated, the user sees the simple reagents table in the reaction configuration form.
If multiple volumes for at least one reagent are used, and the user tries to deactivate the option, a message box appears:
QIAgility Version 4.18 User Manual 06/2023 69