Table of Contents
Advertisement
Cleaning After Each Use
6
Cleaning After Each Use
Cleaning using a suitable cleaning
agent
Fig. 6: Lip (arrow) of the outlet nozzle.
16
User qualification: instructed user, see
n
qualifications' on page 7
WARNING!
Change of medium = Clean the pump
Hazard from the chemical incompatibility of the media.
Possible consequence: Health risk and/or damage to
the pump and/or medium.
Remedy: Always thoroughly clean the pump when the
medium is changed. If you do not clean the pump, it
can lead to incompatibility between the medium and
pump or old medium and new medium. Refer to the
material safety data sheet on the feed chemical.
Regular cleaning of the pump increases its service life and main‐
tains the performance of the pump.
1.
Note the resistance of the pump and the hose to the cleaning
agent, referring to the reference list.
2.
Use a suitable cleaning agent to rinse the pump, referring to
the materials safety data sheet for the medium. Never use
flammable or explosive liquids.
3.
Only immerse the pump in the cleaning agent as far as the lip
(arrow) of the outlet nozzle and never immerse the pump
fully.
4.
Rinse the pump until the pump is clean.
ð The pump is now ready for further use, also with a dif‐
ferent medium.
A2270
BARRELPUMP.IR
Ä Chapter 2.2 'Users'
Advertisement
Table of Contents
