Table of Contents
Advertisement
Safety Chapter
2.5.2 Safety Information for the Pump Nozzle
10
Do not expose the pump to weathering.
n
Clean the pump after each use, referring to the material safety
n
data sheets issued by the manufacturer of the hazardous
material.
Do not store the pump in aggressive fumes.
n
WARNING!
Danger from hazardous substances!
Possible consequence: Fatal or very serious injuries.
Please ensure when handling hazardous substances
that you have read the latest safety data sheets pro‐
vided by the manufacture of the hazardous substance.
The actions required are described in the safety data
sheet. Check the safety data sheet regularly and
replace, if necessary, as the hazard potential of a sub‐
stance can be re-evaluated at any time based on new
findings.
The system operator is responsible for ensuring that
these safety data sheets are available and that they
are kept up to date, as well as for producing an associ‐
ated hazard assessment for the workstations affected.
Non-observance of the safety information
Non-observance of the safety information can lead to
damage to people and the environment and also result
in damage to the pump nozzle.
Only pump clean liquids.
n
When using, note the maximum operating pressure of 2 bar at
n
60 °C. The pump nozzle can recoil.
When filling into a storage tank, make sure that no overpres‐
n
sure can build up in this storage tank. Danger from spraying
liquids.
Do not fill up too quickly to prevent the liquids from splashing
n
out of the storage tank.
Only bend the hose slightly to prevent too high mechanical
n
stresses being exerted on the pump nozzle
Only fill up using the pump nozzle under supervision, as the
n
nozzle does not automatically shut off.
Check during commissioning whether the manual lever returns
n
automatically into its starting position.
Use visual controls to regularly monitor the external condition
n
of the pump nozzle.
Allow the pump nozzle to drain at the end of the filling process.
n
Regularly check to make sure that the hose clips are fixed
n
securely.
Remove any spilled liquid and dispose of it in an environmen‐
n
tally-friendly manner, referring to the material safety data
sheets issue by the manufacturer of the hazardous material.
Note any internal instructions.
n
Wear protective clothing, referring to the material safety data
n
BARRELPUMP.IR
sheets issued by the manufacturer of the hazardous material.
Do not expose the pump nozzle to weathering.
n
Advertisement
Table of Contents
