Page 4
Cam bolt Wooden dowel Screw Cam lock x 40 x 12 x 40 x 48 Plastic wedge Screw Screw Handle component with screw x 16 Drawer slider PVC nail with pin USB lnterface Tools Required (Not included)
Page 5
Step 1 Step 2 Slider arm Slider bracket · Separate the slide bracket from the slide arm as per diagram. 3...
Page 6
x 24 · Screw cam bolts(A) into panels(1,3,4,5). · Knock pins(J) into panels(3,4).
Page 7
Mounting holes x 24 · Attach Slider arms to panels (3,4) with screws (D) correctly.
Page 8
2 Person Task · Insert dowels (C) into panel (2). · Attach panels (2,6) to panel (3), · Insert and secure cam locks (B) to panels (2,6) to lock it.
Page 9
2 Person Task · Insert dowels (C) into panel (2). · Attach panel (4) to panels (2,6), · Insert and secure cam locks (B) to panels (2,6) to lock it.
Page 10
·Carefully slide panels (7,13) into place along the back of the assembly.
Page 11
· Insert dowels (C) into panels (3,4). · Attach panel (1) to panels (3,4), · Insert and secure cam locks (B) to panels (3,4) to lock it.
Page 12
· Insert dowels (C) into panels (3,4). · Attach panel (5) to panels (3,4), · Insert and secure cam locks (B) to panels (3,4) to lock it.
Page 13
· Secure parts(F1) with screws (F2) as per diagram.
Page 14
· Attach socket(K) to panel(5) with screws(G) correctly.
Page 15
Step 1 Step 2 x 16 · Attach panels (9,10) to panel (11) with screws (E). · Carefully slide panel (12) into place along the bottom of the assembly.
Page 16
x 16 · Screw cam bolts(A) into panels(8). · Attach parts (H) to panel (8) correctly.
Page 17
x 16 · Attach panel (8) to panels (9,10). · Insert and secure cam locks (G) to panels (9,10) to lock it.
Page 18
Mounting holes x 24 · Attach slider brackets to panels (9,10) with screws (D) correctly.
Page 19
Slider arm Slider bracket Adjust Height / 高さを調節 · Assembled the drawers as per diagram Note : If the drawer does not go in smoothly. Press or lift the plastic release lever. Pull out the slider bracket from the slider arm. Loosen the screws (D) on slider brackets, You can adjust up or down by a few mm.
Page 20
Slider arm Slider bracket Adjust Height / 高さを調節 · Assembled the drawers as per diagram Note : If the drawer does not go in smoothly. Press or lift the plastic release lever. Pull out the slider bracket from the slider arm. Loosen the screws (D) on slider brackets, You can adjust up or down by a few mm.