Related Manuals for Wampat W06L3051N
Summary of Contents for Wampat W06L3051N
- Page 1 Assembly Instructions W06L3051N Please read this manual carefully before beginning assembly of this product.Keep this manual for future reference.
- Page 4 This illustration shows how the CAM fastening system works. x 20 x 16 Esta ilustración muestra como funciona el x 20 sistema de fijación de leva. Cette illustration montre comment le système de fixation de la CAME fonctionne. Tools Required (Not included)
- Page 5 x 16 · Screw cam bolts (A) into panels (2,3,4,5). ３...
- Page 6 · Insert dowels (C) into panels (2,3,4,5,6). · Insert and secure cam locks (B) to panels (6) to lock it.
- Page 7 Step 1 Step 2 Step 3 Final Assembly Please note the installation direction of (F1), do not install it in reverse. · Screw parts (F1) into panel (7) using screws (G) ,then cover (F1) with (F2).
- Page 8 · Insert dowels (C) into panel (6). · Insert and secure cam locks (B) to panels (7,10) to lock it.
- Page 9 · Carefully slide panel (9) into place along the back of the assembly.
- Page 10 · Insert dowels (C) into panels (6,7,10). · Insert and secure cam locks (B) to panels (7,10) to lock it.
- Page 11 · Stick the skid pad ( ) on the bottom of the parts (2,3,4,5).
- Page 12 · Screw cam bolts (A) into panel (1).
- Page 13 · Insert and secure cam locks (B) to panels (2,3,4,5) to lock it.
- Page 14 · Secure parts (D) with Screws (E) as per diagram. · Stick stickers (K) on cam locks (B).
- Page 15 · Secure parts (J) with Screws (L) as per diagram. · Insert two parts (H) into part (8) , then press two parts (H) and move part (8) into part (7) and (10) . · Release the hand pressing parts (H) , move part (8) to make parts (H) aligned with the holes on part (7) and (10) .
-
Page 16: Final Assembly
Final Assembly Please clean the surface before installation. Step 1: Keep the switch in the "off" Step 2: Insert USB cable into Wall Charger Step 3: Tear tape behind the light strip and stick anywhere you want Note: 1.Light strip is non-waterproof. 2.There are cutting marks on the light strip. - Page 17 Final Assembly Tip: If you find that the door does not connect smoothly, you can adjust part (F) to achieve a perfect connection.