Related Manuals for Wampat W06F3052W
Summary of Contents for Wampat W06F3052W
- Page 1 Assembly Instructions W06F3052W Please read this manual carefully before beginning assembly of this product.Keep this manual for future reference.
- Page 4 Cam lock Cam lock Cam bolt Wooden dowel Ø15x11mm Ø15x9mm Ø6x35mm ● The provided glue(G) is to secure wood Ø8x30mm dowels(A) in place . When first inserting x 12 x 16 x 22 dowels, locate the appropriate hole for the dowel , place a small amount of glue in the hole and insert the dowel .
- Page 5 Screw Cam bolts (B) into panels (4,5,6). · · Insert dowels (A) into panels (4,5). · Attach panels (6) to panels (4,5). · Insert and secure cam locks (C) to panels (4,5) to lock it. Ø8x30mm Ø6x35mm Ø15x11mm ３...
- Page 6 · Insert dowels (A) into panels (4,5). · then attach panels (9) to panels (4,5) using screw (L). Ø8x30mm Ø4x32mm...
- Page 7 Slider arm Slider arm Slider bracket Slider bracket · Separate the slider bracket from the slide arm as per diagram. · Attach Slider arms to panels (9) with screws ( ) correctly. Ø3x12mm...
- Page 8 · Insert dowels (A) into panel (2). ·Attach panels (4,5) to panel (2). Ø8x30mm Ø15x11mm ·Insert and secure cam locks (C) to panel (2) to lock it.
- Page 9 ·Carefully slide panel (7) into place along the back of the assembly.
- Page 10 · Screw cam bolts (B) into panel (1). · Insert dowels (A) into panel (1). · Attach panel (11) to panel (1) with screws (F). Ø8x30mm Ø6x35mm Ø4x44mm...
- Page 11 · Insert dowels (A) into panel (4,5). · Attach panel (1) to panels (4,5). · Insert and secure cam locks (C) to panels (4,5) to lock it. Ø8x30mm Ø15x11mm...
- Page 12 · Carefully slide panel (8) into place along the back of the assembly. · Insert dowels (A) into panels (4,5). · Then attach panel (3) to panels (4,5) using screws (F). Ø8x30mm Ø4x44mm...
- Page 13 · Attach legs (10) to panel (3). · Stick the skid pad (O) on the bottom of the legs (10).
- Page 14 · Secure parts (M) to panels (1,2,3,4,5) using screws (N). Ø3x17mm...
- Page 15 · Attach panels (13,14) to panel (15) wiht screws (L). · Carefully slide panel (16) into place along the bottom of the assembly. Ø4x32mm...
- Page 16 · Screw cam bolts (B) into panel (12). · Attach handles (K) to panel (12) with bolts (J). · Attach panels (12) to panels (13,14). · Insert and secure cam locks(D) to panels (13,14) to lock it. Ø6x35mm Ø15x9mm Ø5/32"x12mm...
- Page 17 · Attach slider brackets to panels (13,14) with screws ( ) correctly. Ø3x12mm...
- Page 18 · Stick stickers (E) on cam locks (C,D). x 16 Slider arm Slider bracket · Assembled the drawers as per diagram Note :If the drawer does not go in smoothly. Press or lift the plastic release lever. Pull out the slider bracket from the slider arm then re-assembled the drawer until they were going in smoothly well.
- Page 19 Please clean the surface before installation. Step 1: Keep the switch in the "off" Step 2: Plug USB cable into your TV Step 3: Tear tape behind the light strip and stick anywhere you want Note: 1. Light strip is non-waterproof. 2.There are cutting marks on the light strip.
- Page 20 WARNING Serious or fatal injuries can occur from furniture tipping over. To prevent the furniture from tipping over we recommend that it is permanently fixed to the wall. Wall anchor and hardware are included with this product. Please make sure hardware is suitable for your walls before installing, as different wall materials may require different types of anchors.
-
Page 21: Final Assembly
Final Assembly...