Page 4
Wooden dowel Cam bolt Cam bolt ● The provided glue(H) is to secure wood Sticker Ø8x30mm Ø6x35mm Ø15x11mm dowels(A) in place . When first inserting dowels, locate the appropriate hole for the C x 18 D x 18 A x 22 B x 18 dowel , place a small amount of glue in the hole and insert the dowel .
Page 5
B x 10 · Screw Cam bolts(B) into panels(4,6,7,9). 3...
Page 6
A x 2 C x 2 · Insert dowels(A) into panel(11). · Attach panels(6,9) to panel(11). · Insert and secure cam locks(C) to panel(11) to lock it.
Page 7
B x 4 M x 1 N x 2 Q x 1 · Screw Cam bolts(B) into panel(2). · Attach Magnetic catch(M) to panel(2) using screws(N) correctly. · Insert Door shaft support(Q) to panel(2).
Page 8
A x 4 C x 4 · Insert dowels(A) into panels(5,8). · Attach panel(2) to panels(5,8). · Insert and secure cam locks(C) to panels(5,8) to lock it.
Page 9
A x 4 C x 4 · Insert dowels(A) into panels(6,9). · Attach panels(5,8) to panels(6,9). · Insert and secure cam locks(C) to panels(5,8) to lock it.
Page 10
A x 4 C x 4 · Insert dowels(A) into panels(5,8). · Attach panels(4,7) to panels(5,8). · Insert and secure cam locks(C) to panels(5,8) to lock it.
Page 11
Q x 1 · Carefully slide panel(10) into place along the back of the assembly. · Insert Door shaft support(Q) to panel(3).
Page 12
A x 8 E x 4 · Insert dowels(A) into panels(4,5,6,7,8,9). · Attach panel(3) to panels(5,8) using screws(E).
Page 13
I x 8 J x 1 · Attach parts(13) to parts(14) using Bolts(I).
Page 14
I x 6 · Attach parts(13,14) to panel(3) using Bolts(I).
Page 16
C x 4 · Attach panel(1) to panels(4,6,7,9). · Insert and secure cam locks(C) to panels(4,6,7,9) to lock it.
Page 17
F x 4 G x 4 · Secure parts(F) using screws(G).
Page 18
· Attach Hinge-top(S) to panel (12) using screws(P). · Attach part(O) to panel(12) using screw(P). · Attach Handle(L) to panel(12) using bolts(K). K x 2 L x 1 O x 1 P x 3 S x 1...
Page 19
· Insert Hinge-bottom(R) to panel(3). P x 2 R x 1 · Insert panel(12) to panel(2). · Attach Hinge-bottom(R) to panel(12) using screws(P).
Page 20
· Stick stickers(D) on cam lock(C). D x 18 · To adjust side ways. Loosen screws(P) and adjust door, then tighten screws(P). · To adjust depth. Loosen screws(N) and adjust Magnetic catch(M), then tighten screws(N).