Related Manuals for Wampat W06F4051W
Summary of Contents for Wampat W06F4051W
- Page 1 Assembly Instructions W06F4051W Please read this manual carefully before beginning assembly of this product.Keep this manual for future reference.
- Page 4 ● The provided glue(G) is to secure wood Cam bolt Wooden dowel Cam lock Cam lock dowels(A) in place . When first inserting Ø15x11mm Ø15x9mm Ø6x35mm Ø8x30mm dowels, locate the appropriate hole for the dowel , place a small amount of glue in the x 20 x 24 x 12...
- Page 5 · Screw Cam bolts (B) into panels (4,5,6). · Insert dowels (A) into panels (4,5). · Attach panels (6) to panels (4,5). · Insert and secure cam locks (C) to panels (4,5) to lock it. Ø8x30mm Ø6x35mm Ø15x11mm ３...
- Page 6 · Insert dowels (A) into panels (4,5). · then attach panels (9) to panels (4,5) using screw (L). Ø8x30mm Ø4x32mm...
- Page 7 Slider arm Slider arm Slider bracket Slider bracket x 12 · Separate the slide bracket from the slide arm as per diagram. · Attach Slider arms to panels (9) with screw ( ) correctly. Ø3x12mm...
- Page 8 · Insert dowels (A) into panel (2). · Attach panels (4,5) to panel (2). Ø8x30mm Ø15x11mm · Insert and secure cam locks (C) to panel (2) to lock it.
- Page 9 ·Carefully slide panel (7) into place along the back of the assembly.
- Page 10 · Screw Cam bolts (B) into panel (1). · Insert dowels (A) into panels (4,5). · Attach panels (1) to panels (4,5). Ø8x30mm Ø6x35mm Ø15x11mm · Insert and secure cam locks (C) to panels (4,5) to lock it.
- Page 11 · Carefully slide panel (8) into place along the back of the assembly. · Insert dowels (A) into panels (4,5). · then attach panel (3) to panels (4,5) using screws (F). Ø8x30mm Ø4x44mm...
- Page 12 · attach legs (10) to panel (3). · Stick the skid pad (O) on the bottom of the legs (10).
- Page 13 · Secure parts (M) to panels (1,2,3,4,5) using screws (N). Ø3x17mm...
- Page 14 ×2 · Attach panels (12,13) to panel (14) wiht screws (L). · Carefully slide panel (15) into place along the bottom of the assembly. Ø4x32mm...
- Page 15 · Screw Cam bolts (B) into panel (11). · Attach Handle (K) to panel (11) with bolts (J). · Attach panel (11) to panels (12,13). · Insert and secure cam locks (D) to panels (12,13) to lock it. ×2 Ø6x35mm Ø5/32"x12mm Ø15x9mm...
- Page 16 ×2 x 12 · Attach slider brackets to panels (12,13) with screws (I) correctly. Ø3x12mm...
- Page 17 · Stick stickers (E) on cam locks (C,D). x 20 Slider arm Slider bracket · Assembled the drawers as per diagram Note :If the drawer does not go in smoothly. Press or lift the plastic release lever. Pull out the slider bracket from the slider arm then re-assembled the drawer until they were going in smoothly well.
- Page 18 WARNING Serious or fatal injuries can occur from furniture tipping over. To prevent the furniture from tipping over we recommend that it is permanently fixed to the wall. Wall anchor and hardware are included with this product. Please make sure hardware is suitable for your walls before installing, as different wall materials may require different types of anchors.
- Page 19 Final Assembly...