Related Manuals for Wampat W06A3051E
Summary of Contents for Wampat W06A3051E
- Page 1 Assembly Instructions W06A3051E W06A3052R Please read this manual carefully before beginning assembly of this product.Keep this manual for future reference.
- Page 4 M6x24mm Ø15x12mm Ø12x10mm This illustration shows how the CAM fastening system works. x 20 x 12 Esta ilustración muestra como funciona el sistema de fijación de leva. Cette illustration montre comment le système de fixation de la CAME fonctionne. Ø8x30mm Ø25mm Ø16x18mm Ø4x32mm...
- Page 5 ·Knock parts (F) into panels (2,3). Ø16x18mm ３...
- Page 6 ·Screw cam bolts (A) into panels (2,3). M6x24mm...
- Page 7 · Separate the slide bracket(H-2) from the slide arm(H-1) as per diagram. · Attach slider arm(H-1) to panels(2,3) with screws (I) correctly. Drawer slide Ø3.5x12mm...
- Page 8 · Insert dowels(D) into panels(4,5). · Attach panels (4,5) to panels (2,3). · Insert and secure cam locks(B) to panels (4,5) to lock it. Ø15x12mm Ø8x30mm...
- Page 9 · Screw cam bolts (A) into panel (6). · Attach panel (6) to panels (2,3). · Insert and secure cam locks(B) to panels (2,3) to lock it. M6x24mm Ø15x12mm...
- Page 10 · Carefully slide panels(7,14) into place along the back of the assembly.
- Page 11 · Screw cam bolts (A) into panel (1). M6x24mm...
- Page 12 · Insert dowels (D) into panels (2,3). · Attach panel (1) to panels (2,3). · Insert and secure cam locks (B) to panels (2,3) to lock it. Ø8x30mm Ø15x12mm...
- Page 13 ·Screw cam bolts (A) into panels (8,9). M6x24mm...
- Page 14 · Attach slider bracket (H-2) to panels (10,11) with screws (I) correctly. Ø3.5x12mm...
- Page 15 · Attach panels(10,11) to panels(12) with screws(G). · Carefully insert panels(13) into the slot of panels(10,11,12). Ø4x32mm...
- Page 16 · Attach panels(8,9) to panels(10,11). · Insert and secure cam locks(C) to panels(10,11) to lock it. · Attach handles(J) to panels(8,9) with bolts(K). Ø12x10mm Handle Ø4x25mm...
- Page 17 Slider arm Slider bracket If the drawer does not fit in smoothly, try the following steps: · Press or lift the plastic release lever. · Pull out the slider bracket from the slider arm, then reassemble the sliders until the drawer can be slid smoothly.
- Page 18 · Secure parts(L) with Screws(M)as per diagram. Plastic wedge Ø3x17mm...
-
Page 19: Final Assembly
Final Assembly · Stick stickers (E) on cam locks (C). Ø25mm...