Create Command
You can use create command to create the RAID array.
Syntax
create ArrayType (RAID0/RAID1/RAID10) MemberDiskList (1/1,1/2|*) Capacity(100|*)
Table23: Properties for Create Command
The following table lists and describes the properties for the create command.
Cmd
Property Name
create
ArrayType (RAID0/RAID1/RAID10)
MemberDiskList (1/1,1/2|*) Capacity(100|*)
Create an array
Example1
<<<create RAID0 * *
This command instructs the system to create RAID0 array with all disks and with maximum capacity.
Description
This command allows you to create a new RAID array.
88