Step 4 Create Array - HighPoint SSD7103 Installation Manual

SSD7103 Linux CentOS7.6 Installation Guide

Step 4 Create Array

a. Attach four NVMe SSD to HighPoint NVMe RAID Controller ;
Note
Make sure your USB flash partition format is NTFS or FAT32.
b. Boot, in the presence of the motherboard Log screen, there will be NVMe SSD
information：
c. Enter the motherboard's Boot List and select start from UEFI USB flash:
d. Command "mode", "mode 160 53" to change the resolution:
5/11