Table of Contents
Advertisement
4.
Select disks to be used to create RAID array. Select the disk that needs to create RAID array, and the status of the disk
changes from Disabled to Enabled, which means that the disk has been selected.
Note:
Disks don't need to be initialized before they can be used to create arrays.
5.
After all of the disks have been selected, you can decide how much storage capacity will be assigned to the array using.
If you wish to reserve disk space for additional arrays/single disks, use the keyboard to input the amount of space (in
GB) you wish to set aside for this particular array.
6.
Next, select, press to create RAID to complete the RAID Array creation. A pop-up window prompt: Are you sure to
create RAID0 with following disk(s). Press 'Y' to confirm. 'N' / 'ESC' to ignore.
97
Advertisement
Table of Contents
