Table of Contents
Advertisement
Disable Disk Security
Syntax
secure {devices-id} secureerase force
The command is used to erase the Disk Security configuration and securely erases data.
Note:
Disk Security cannot be disabled if the disks have the "Legacy" status. If the disk (or disks) has the "Legacy"
status, you can remove this by using the "Init" function (initialize).
Example
HPT CLI> init 1/E1/1
HPT CLI> secure 1/E1/1 secureerase force
The command is used to disable disk security for disk 1/E1/1 with legacy status.
Note:
You can check if disable Disk Security is in effect with the command: query devices. The secured status of
enable Disk Security is Yes, and the secured status of disable Disk Security is No.
112
Advertisement
Table of Contents
