Step 3 Flash Uefi Rom To Ssd7505; Step 4 Create Array - HighPoint SSD7505 Installation Manual
Nvme raid controller linux centos7.8
Hide thumbs
Also See for SSD7505:
- Installation manual (14 pages) ,
- Quick installation manual (8 pages) ,
- Using manual (19 pages)
Table of Contents
Advertisement
SSD7505 Linux CentOS7.8 Installation Guide
Step 3 Flash UEFI Rom to SSD7505
a.
Unzip SSD7505 UEFI package to root dir (/) of a USB flash driver, and insert the
USB flash drive to the motherboard;
b.
Booting from the UEFI USB flash and enter the UEFI environment;
c.
Command with "go.nsh", flash UEFI rom to SSD7505 Controller and reboot;
Step 4 Create Array
a.
Attach four NVMe SSD to SSD7505 Controller;
Note
Make sure your USB flash partition format is FAT32.
b.
Boot, in the presence of the motherboard Log screen, there will be NVMe SSD
information：
- 4 -
Advertisement
Table of Contents
