SSD7103 Linux CentOS7.8 Installation Guide
Step 4 Create Array
a.
Attach four NVMe SSD to SSD7103 Controller;
Note
Make sure your USB flash partition format is FAT32.
b.
Boot, in the presence of the motherboard Log screen, there will be NVMe SSD
information:
Enter the motherboard's Boot List and select start from UEFI USB flash:
c.
Command "Arraycreate.efi" to enter the Utility:
d.
Command "create RAID0 ".
e.
Create RAID0 array with all disks and with maximum capacity.
- 4 -