Table of Contents
Advertisement
Linux Rocky Linux on RR2720A Installation Guide
Step 4 Create Array
a.
Attach two hard disks to RR2720A Controller;
b.
Boot, enter the motherboard's Boot List and select start from UEFI USB flash:
c.
Command "ArrayCreate.efi" to enter the Utility:
d.
Command "create RAID0".
Create RAID0 array with all disks and with maximum capacity.
e.
Command "exit"；
f.
For more command usages, refer to
Appendix
A.
- 4 -
Advertisement
Table of Contents
