SSD7540 Linux CentOS7.8 Installation Guide
Step 3 Flash UEFI Rom to SSD7540
a.
Unzip SSD7540 UEFI package to root dir (/) of a USB flash driver, and insert the
USB flash drive to the motherboard;
b.
Booting from the UEFI USB flash and enter the UEFI environment;
c.
Command with "go.nsh", flash UEFI rom to SSD7540 Controller and reboot;
Step 4 Create Array
a.
Attach eight NVMe SSD to SSD7540 Controller;
Note
Make sure your USB flash partition format is FAT32.
b.
Boot, in the presence of the motherboard Log screen, there will be NVMe SSD
information:
- 4 -