Table of Contents
Advertisement
Unplug Command
In order to ensure data security, if you want to unplug an existing RAID array or disks while the system is working, use
unplug command first and then unplug disks.
Syntax
unplug {array _id or device _id}
Table6: Properties for Unplug Command
The following table lists and describes the properties for the unplug commands.
Cmd
Property Name
unplug
{device_id}
unplug
{array_id}
Unplug disk
unplug {device_id}
This command instructs the system to unplug the disk.
Example
HPT CLI>unplug 1/E1/1
This command allows you to remove a disk from a running system without shutting down.
Description
This command instructs the system to unplug the disk.
This command instructs the system to unplug the array.
59
Advertisement
Table of Contents
