Pantum P2500 Series User Manual
  1. Manuals
  2. Brands
  3. Pantum Manuals
  4. Printer
  5. P2500 Series
  6. User manual

Pantum P2500 Series User Manual

Monochrome laser printer
Hide thumbs Also See for P2500 Series:
Table of Contents

Advertisement

Quick Links

Pantum P2200/P2500 Series
Pantum P2600 Series
Monochrome Laser Printer
It is recommended to carefully read this Guide before using the printer

Advertisement

Table of Contents
loading

Related Manuals for Pantum P2500 Series

Summary of Contents for Pantum P2500 Series

  • Page 1 Pantum P2200/P2500 Series Pantum P2600 Series Monochrome Laser Printer It is recommended to carefully read this Guide before using the printer...
  • Page 2 Version: V2.3 Disclaimer For a better user experience, Zhuhai Pantum Electronics Co., Ltd. reserves the right to make changes to the User Guide. The information contained herein is subject to change without notice. Users are responsible for any damages arising from failing to follow this User Guide. Meanwhile, except the express warranty made in the product maintenance manual or service commitment, Zhuhai Pantum Electronics Co., Ltd.
  • Page 3 Safety Precautions Disconnect the power supply The product should be placed close to or easily accessible to power sockets, so as to allow easy disconnection of power supply! Laser Safety The laser radiation is harmful to the human body. Since laser components are completely sealed in the printer, laser radiation will not leak.
  • Page 4 Safety Warning Please note the following safety warnings before using the printer: Warning There is a high-voltage electrode inside the printer. Before cleaning the printer, make sure the power is turned off! Plugging and unplugging the power cord plug with a wet hand may result in an electric shock.
  • Page 5 Precautions Precautions before Using the Printer: 1. Read and understand all instructions; 2. Familiarize yourself with the basic principles associated with operating electrical appliances; 3. Comply with all warnings and instructions marked on the equipment or specified in the manual supplied with the equipment;...
  • Page 6 23. This product is sold as a complete machine. The consumers can go to Pantum Aftersales Service Centre to purchase parts they need. If the product sold is inconsistent with the package list, please go to the specified Aftersales Service Centre to solve the problem;...
  • Page 7 Radio Equipment directive 2014/53/EU only for models ending with suffix “W”. The manufacturer of this product is: Zhuhai Pantum Electronics Co., Ltd., Building 02,06 and 08,No.888 Shengping Avenue, Pingsha Town, Zhuhai City, Guangdong Province, 519000 PR China.

  • Page 8: Table Of Contents

    6. Mobile Print (for models with Wi-Fi function only) ..............50 6.1. "Pantum" APP ......................50 6.1.1. Operating systems supported ................50 6.1.2. How to download Pantum APP ................. 50 6.1.3. How to use this "Pantum" APP ................50 6.2. Mopria mobile print ...................... 51...
  • Page 9 7.4. Cancel Print Job ......................59 8. Control Panel ........................60 8.1. Control Panel Overview for P2500 Series ..............60 8.1.1. Functions of Buttons on the Control Panel ............60 8.1.2. Function of LED Indicators on the Control Panel ..........61 9.

  • Page 10: Before Using The Printer

    When you open the package, make sure that the following parts are included in the carton: P2200/P2500 Series P2600 Series Name Quantity Printer Laser Toner Cartridge USB Interface Cable Power Cord CD-ROM Quick Setup Guide Pantum Warranty Note: • The Pantum Warranty may not be attached in some regions.

  • Page 11: Components Of The Printer

    1.2. Components of the Printer | Front View Serial No. P2200/P2500 Series P2600 Series Output Bin Output Bin Control Panel Control Panel Output Tray Output Tray Automatic Feed Guide Manual Feed Guide Paper Stop Automatic Feed Guide Feeder Tray Paper Stop...

  • Page 12: Laser Toner Cartridge

    • Consumables capacity may vary depending on the types used. • The Company does not recommend using consumables other than that of the original Pantum consumables. • Any damages caused by using non-Pantum original consumables are not covered by the Warranty.

  • Page 13: Paper And Print Media

    3. Some print media may meet all the use guidelines contained herein, but they still can not bring satisfactory effect. This may be due to incorrect operation, inappropriate temperature and humidity, or other factors beyond the control of Pantum. Before purchasing large quantities of print media, make sure that the print media meets the specifications specified in this User Guide.

  • Page 14: Special Paper

    • When using special media to print, it is recommended to load one piece of paper at one time. For P2200/P2500 series, load one piece of special paper into the automatic feeder tray at one time. For P2600 series, load one piece of special paper into the manual feeder tray at one time.

  • Page 15: Loading Paper

    2.3. Loading Paper 2.3.1. Loading into the Automatic Feeder Tray a) Open the feeder tray. P2200/P2500 Series P2600 Series b) Slide the automatic feed guides to match both sides of the paper. P2200/P2500 Series P2600 Series c) Raise the output tray to avoid the paper from slipping and falling.

  • Page 16: Loading Into The Manual Feeder Tray

    ① into the slot to keep it from slipping out, and then adjust the blue stop② to match the paper size. P2200/P2500 Series P2600 Series • If the paper loaded into the automatic feeder tray at one time exceeds 150 pages, paper Note: will jam or cannot be fed in.
  • Page 17 b) Slide the manual feed guides to match both sides of the paper. c) Raise the output tray to avoid the paper from slipping and falling. d) Put the print media like an envelope or transparency into the manual feeder tray with two hands until the front end of the envelope or transparency contacts the correction roller.

  • Page 18: Nonprinting Area

    2.4. Nonprinting Area The shaded section indicates the nonprinting area. Usage Paper Size Top and Bottom Margins (A) Left and Right Margins (B) 5 mm (0.197 inch) 5 mm (0.197 inch) Printing Letter 5 mm (0.197 inch) 5 mm (0.197 inch) 2.5.

  • Page 19: Driver Installation And Uninstallation

    3. Driver installation and uninstallation 3.1. Driver Setup This device supplies driver setup applications for Windows and macOS. We recommend One-click installation, which helps you install the driver automatically in a faster and easier way. Should you encounter trouble when using the One-click installation, you may try more setup methods. •...
  • Page 20 For macOS: • Double-click on “Pantum XXX Series_Mac_Driver” – “Pantum Install Tool”. (The XXX in Pantum XXX Series refers to product model.) 4. Read and agree to the terms contained in the End User License Agreement and the Privacy Policy, click the “Next”...
  • Page 21 • If the Install Tool finds only one printer, it will proceed to network configuration and driver installation automatically when you click on "One-click installation" under Wi-Fi. (For macOS, authorization is required before printer Wi-Fi can be configured.) • If the Install Tool finds more than one printer, a printer list will pop up when you click on "One-click installation"...
  • Page 22 For macOS: • Double-click on “Pantum XXX Series_Mac_Driver”–“Pantum Install Tool”. (The XXX in Pantum XXX Series refers to product model.) 4. Read and agree to the terms contained in the End User License Agreement and the Privacy Policy, click the “Next”...
  • Page 23 • You can put your mouse cursor in the "One-click installation" button to check the popup Note: information in order to confirm if the current printer is the one you need to install through IP address before you click the button. •...
  • Page 24 • If your software has searched more than one printers, the printer list interface will pop up.You need to configure the current printer which is connected via USB cable to wireless network and install driver. Please select "Configure the print via USB and install" on the printer list interface and check the USB printer option.
  • Page 25 For macOS: • Double-click on “Pantum XXX Series_Mac_Driver”–“Pantum Install Tool”. (The XXX in Pantum XXX Series refers to product model.) 4. Read and agree to the terms contained in the End User License Agreement and the Privacy Policy, click the “Next”...
  • Page 26 6. The setup will start when you click on "One-click installation" under Wi-Fi. The setup may take a while, depending on your PC configuration. Please wait. 7. After the installation, click "Print &Test Page" button. If your printer prints the test page successfully, it means that you have installed the driver correctly.
  • Page 27 For macOS: • Double-click on “Pantum XXX Series_Mac_Driver”–“Pantum Install Tool”. (The XXX in Pantum XXX Series refers to product model.) 4. Read and agree to the terms contained in the End User License Agreement and the Privacy Policy, click the “Next”...
  • Page 28 • You can put your mouse cursor in the "One-click installation" button to check the popup Note: information in order to confirm if the current printer is the one you need to install through IP address before you click the button. •...
  • Page 29 For macOS: • Double-click on “Pantum XXX Series_Mac_Driver”–“Pantum Install Tool”. (The XXX in Pantum XXX Series refers to product model.) 3. Read and agree to the terms contained in the End User License Agreement and the Privacy Policy, click the “Next”...
  • Page 30 5. The setup will start when you click on "One-click installation" under USB. The setup may take a while, depending on your PC configuration. Please wait. 6. After the installation, click "Print &Test Page" button. If your printer prints the test page successfully, it means that you have installed the driver correctly.
  • Page 31 For macOS: • Double-click on “Pantum XXX Series_Mac_Driver”–“Pantum Install Tool”. (The XXX in Pantum XXX Series refers to product model.) 5. Read and agree to the terms contained in the End User License Agreement and the Privacy Policy, click the “Next”...
  • Page 32 • If the Install Tool finds only one printer, the setup will start when you click on "One-click installation" under Wired Network. The setup may take a while, depending on your PC configuration. Please wait. • If the Install Tool finds more than one printer, a printer list will pop up when you click on "One-click installation"...

  • Page 33: More Setup Methods

    8. After the installation, click "Print &Test Page" button. If your printer prints the test page successfully, it means that you have installed the driver correctly. 3.1.2. More setup methods 3.1.2.1. More setup methods for Windows • Before installing the drive, you need to learn about printer model by printing printer information page out and check the product name (please refer to Section 8.1.1.3 for printing methods).
  • Page 34 7. The software installs the driver automatically and the installation process may need some time. The duration is related to your computer configuration, please wait patiently. 8. After the installation, click "Print &Test Page" button. If your printer prints the test page successfully, it means that you have installed the driver correctly.
  • Page 35 9. The installation software will search the printer automatically and the searching process may need some time. 10. After finishing searching, select the printer that needs to be connected and click “Next”. • If the printer you need to connect is not in the list of printers searched, please click Note: “Refresh”...
  • Page 36 • Windows 8 system: When the " DVD RW driver" window pops up from the right top corner of computer desktop, click anywhere in the pop-up window, then click "Setup.exe" to run the installation procedure. • Windows 10/11 system: When the "DVD RW driver" window pops up from the right top corner of computer desktop, click anywhere in the window, then click "Setup.exe"...
  • Page 37 8. Select “Yes, I want to configurate the printer's wireless network” on the wireless setup window popped out, and operate according to the prompts to set up the printer to wireless network (please refer to Section 5.1.1 for setup method). 9.
  • Page 38 • If the printer you need to connect is not in the list of printers searched, please click Note: “Refresh” to search again. • When the printer IP address changes under printer driver installed with host ID , you can also directly print without re-installing the driver.
  • Page 39 7. Select "Wireless network connection" and click on "Install". 8. Select “No, the printer has been connected to wireless network” on the wireless setup window popping out, and then click “Next”. 9. The installation software will search the printer automatically and the searching process may need some time.
  • Page 40 1. Turn the power of printer and computer on. 2. Insert the setup CD supplied in the CD-ROM of the PC, and double-click on "Pantum XXX Series_Mac_Driver" – "Pantum Install Tool". (The XXX in Pantum XXX Series refers to product model.)
  • Page 41 Section 4 to learn how to configure the network). 4. Insert the setup CD supplied in the CD-ROM of the PC, and double-click on "Pantum XXX Series_Mac_Driver" – "Pantum Install Tool". (The XXX in Pantum XXX Series refers to product model.) 5.
  • Page 42 6. Enter the password of the PC, and click on “OK”. 7. Click on “More setup methods” at the bottom of the setup interface for access. 8. Select a network printer from the search results. 9. Click on “Install” on the lower right. •...
  • Page 43 Section 4 to learn how to configure the network). 4. Insert the setup CD supplied in the CD-ROM of the PC, and double-click on "Pantum XXX Series_Mac_Driver" – "Pantum Install Tool". (The XXX in Pantum XXX Series refers to product model.) 5.
  • Page 44 1. Turn the power of printer and computer on. 2. Insert the setup CD supplied in the CD-ROM of the PC, and double-click on "Pantum XXX Series_Mac_Driver" – "Pantum Install Tool". (The XXX in Pantum XXX Series refers to product model.)
  • Page 45 5. Click on “More setup methods” at the bottom of the setup interface for access. 6. Click on "Off-line installation" on the lower left. 7. The software installs the driver automatically and the installation process may need some time. The duration is related to your computer configuration, please wait patiently. 8.

  • Page 46: Uninstall Driver

    The information on your computer screen may differ because of multiple operating systems. 1. Click "Go" - "Applications" - "Pantum" - "Utilities" - "Pantum Un-install Tool". 2. Delete the driver as instructed in the pop-up Uninstall window.

  • Page 47: Wired Network Settings (For Wired Network Printer Models)

    • Due to printer upgrades, some functions may be different, depending on the model Note： you purchased. If you have any questions, please contact Pantum Customer Service. 4.1. Set IP Address The IP address of the printer may be automatically obtained through DHCP function or set manually.

  • Page 48: Install The Printer To Network

    4.2. Install the Printer to Network In this setting, the printer is directly connected to the network and can be set to allow all computers on the network to print directly on the printer. 1. Before starting the printer, first connect the network cable to the network port of the printer to establish direct connection to the network.

  • Page 49: Setting Network Products

    4.3. Setting Network Products 4.3.1. View or Change Network Settings You can use the embedded Web server to view or change IP settings. 1. Long press the "Cancel/Continue" button on the control panel to print Demo information page, and view the IP address of the printer. Demo page can be printed by long pressing the button on the control panel (as shown in the figure below) in the idle status.

  • Page 50: Snmp Protocol Setup

    4.3.4. SNMP protocol setup You can set the SNMP protocol through the SNMP interface to improve the network information security of the printer. 1. Turn on printer power to connect printer to network. 2. Log in the embedded Web server (please refer to Chapter 4.3.2 for login method).

  • Page 51: Wireless Network Setup (Applicable To Wi-Fi Models)

    5. Wireless network setup (applicable to Wi -Fi models) Depending on model, the printer with Wi-Fi printing function supports the two types of wireless network connection of both infrastructure connection mode and Soft-AP, while there is usually only one connection between computer and printer at a time. If you have problems during wireless network setup, please refer to Chapter 5.3 Wireless Network Setup Frequently Asked Questions.
  • Page 52 5.1.1.2. Setup methods of wireless network setup tools 1. Take the wireless network setup tool in computer. 1) Windows system: Click the “Start menu” – “All programs” - “Pantum”－ Product name – “Wireless network setup tool”. 2) macOS system: click "Go" - "Applications" - "Pantum" - "Utilities" - "Wireless Network Configuration Tool"...
  • Page 53 • The SSID you selected should be consistent with the SSID of access point (wireless Note： router) connected to your computer. 2) Please tick “No” to configure other wireless network needed to connect to. Complete configuration according to interface prompt. Note：...
  • Page 54 2.2 The computer is not connected to wireless network Input the SSID (case sensitive) and password of access point (wireless router) in the interface below. Complete configuration according to interface prompt. • If you do not know the SSID of access point (wireless router), please click “Print Note：...
  • Page 55 1) Use WPS method to perform steps below to start wireless network on printer. (Please refer to Chapter 5.1.2 for detailed WPS configuration) 2) Judge if the printer is successfully connected according to the status of Wi-Fi indicator on printer. If configuration failed, please click “Previous”...

  • Page 56: Wi-Fi Protected Setup (Wps) Setup

    5.1.2. Wi-Fi Protected Setup (WPS) setup If the access point (wireless router) supports Wi-Fi Protected Setup (WPS), the Wi-Fi key on the control panel of printer and WPS key on access point (wireless router) can be pressed in order to connect the printer to wireless network.

  • Page 57: Wi-Fi Hotspot Mode

    5.2. Wi-Fi hotspot mode You can establish a connection between a wireless network-enabled computer and a wireless network-enabled printer without using an access point (wireless route). 5.2.1. Preliminary preparations 1. Printer with Wi-Fi hotspot function. 2. Computer with wireless network function. 5.2.2.
  • Page 58 • Inspect if the IP address assignment of printer is correct. You can inspect IP address by printing the network setup information page of printer out. • Please refer to the following steps to check if printer and computer are in the same network: 1) Select "Command prompt"...

  • Page 59: Mobile Print (For Models With Wi-Fi Function Only)

    How to download it for iOS mobile device: Click the App Store icon > Search interface > input “PANTUM” or “Pantum print” in the search bar > Download and install on the interface of iOS device to download. 6.1.3. How to use this "Pantum" APP 6.1.3.1.

  • Page 60: Mopria Mobile Print

    6.1.3.2.2. Operation steps 1. Turn on printer power. 2. For an iOS mobile device, tap the “PANTUM” icon on the main screen to enter the first interface of “PANTUM”. 3. Select the connection method according to your habit to connect the printer.

  • Page 61: How To Use Mopria Mobile Printing

    3. Open the files you need to print with Adobe Reader on the Android device. 4. Click 5.Tap "print". 6.Please make sure the Pantum printer is selected. If you selected other printer (or failed to select any printer), please tap the pull-down menu of printer, and select your Pantum printer.

  • Page 62: How To Use Airprint Mobile Printing

    5. Tap "print". 6. Please make sure the Pantum printer is selected. If you select other printers (or no printer), please click printer option and then select your Pantum printer. 7. Set printing parameters such as number of copies to print.

  • Page 63: Print

    7. Print 7.1. Print Function The print function can be achieved through the settings of various properties in the Printing Preferences, and some of the functions are as follows. Functions Diagram Manual Duplex Collate Reverse Print N-in-1 Poster Print (for Windows system only) Zoom Print Custom Size •...

  • Page 64: Opening Help Document

    7.2. Opening Help Document You can open the Printing Preferences and click Help button (for Windows system only). The help document contains the user guide where you can find the information on print settings.

  • Page 65: Manual Duplex

    7.3. Manual Duplex 1. The printer driver supports manual duplex. •If the paper is thin, it may wrinkle. Note: • If the paper is curled, make it flat and put it back into the manual feeder tray or automatic feeder tray. •...
  • Page 66 Select Pantum printer Click Preferences to set up for printing. c) Check Manual Duplex in the Basic tab and click OK after completing the settings...
  • Page 67 d) Click Print. • It is recommended to raise the output tray to prevent the paper from sliding out of it. If you Note: choose not to raise the output tray, we recommend that you immediately remove the printed paper output from the printer. e) Send the print job after choosing Manual Duplex, then the following prompt window will appear, telling you the next specific operations.

  • Page 68: Cancel Print Job

    g) You can click Close button to close this prompt window, and it will not appear until the next Manual Duplex job comes in. 7.4. Cancel Print Job Press and hold the Cancel/Continue button on the control panel to cancel the job you want to cancel during the printing process.

  • Page 69: Control Panel

    8. Control Panel 8.1. Control Panel Overview for P2500 Series The printer control panel layout includes 2 buttons and 2 multi-colored LED indicators as shown below. The diagram on the left shows the control panel of the printer with USB+Wi-Fi interface, while the one on the right displays the control panel of the printer with USB interface only: Serial No.

  • Page 70: Function Of Led Indicators On The Control Panel

    8.1.1.2. Operation Function of Cancel/Continue Button If the printer is in sleep mode, press or press and hold this button can wake it up. Press and hold this button during printing can cancel the current print job. When the printer is in ready mode, press and hold this button can print the test page. 8.1.1.3.
  • Page 71 8.1.2.2. LED2 Status Indication The meanings of the status indication of LED2 are as follows: Data/Cartridge Status Description Serial Multi-colored LED2 (For printers with USB+Wi-Fi interface and the ones with USB Status Indication interface only) Starting and warming up the printer, waking up and warming up the printer, and warming up the printer by opening and closing its cover.
  • Page 72 8.1.2.3. Indication of LED1 and LED2 Combination Status You can refer to the indicator combination list for information on the working status of the printer. Some of the LED1 and LED2 combined indications are as follows: Status Serial Paper/Wi-Fi Data/Cartridge Status Description (Multi-colored (Multi-colored...

  • Page 73: Routine Maintenance

    Please clean the printer in accordance with the following steps: 1. Turn off the main power switch and unplug the power cord and USB cable. P2200/P2500 Series P2600 Series 2. Use a soft cloth to wipe the outside of the printer clean.

  • Page 74: Maintenance Of Laser Toner Cartridge

    P2600 Series 9.2. Maintenance of Laser Toner Cartridge 9.2.1. Use and Maintenance of Laser Toner Cartridge For better print quality, please use the original Pantum laser toner cartridge. Note: when using the laser toner cartridge, please pay attention to the following: •...

  • Page 75: Service Life Of Laser Toner Cartridge

    • While installing the laser toner cartridge, do not touch the surface of the photosensitive drum so as not to scratch it. Replacement steps are as follows: 1. Open the upper cover, and remove the empty laser toner cartridge along the guides. P2200/P2500 Series P2600 Series...
  • Page 76 2. Open the package of a new laser toner cartridge, hold the handle of the cartridge and gently shake around 5-6 times, so as to make the toner evenly distributed inside the cartridge. P2200/P2500 Series P2600 Series 3. Remove the protective cover, and put the laser toner cartridge into the printer along the guides...
  • Page 77 4. Close the upper cover tightly P2200/P2500 Series P2600 Series...

  • Page 78: Troubleshooting

    • If the printer still does not start printing, please check whether all the jammed paper inside the printer are cleared. • If you cannot remove the jammed paper yourself, please contact your local Pantum authorized repair center or send the printer to the nearest Pantum authorized service center for repair.

  • Page 79: Paper Jam Inside The Printer

    10.1.2. Paper Jam inside the Printer 1. Open the upper cover. P2200/P2500 Series P2600 Series 2. Open the upper fuser guide to decrease the pressure of compression spring. P2200/P2500 Series P2600 Series 3. Pull the jammed paper out of the fuser unit.
  • Page 80 4. Remove the laser toner cartridge along the guides P2200/P2500 Series P2600 Series 5. Slowly pull the jammed paper out along the paper output orientation. P2200/P2500 Series P2600 Series 6. After removing the jammed paper, insert the laser toner cartridge into the printer along the guides until you hear a click assuring you that the cartridge is fully inserted.

  • Page 81: Common Troubleshooting

    7. Put the paper in the tray neatly, and do not carry out the next print until the indicator resumes print-ready status. P2200/P2500 Series P2600 Series 10.2. Common Troubleshooting 10.2.1. Common Trouble Trouble Cause Solution Printer Problems The cable between the computer and the printer is not Disconnect and then reconnect the printer cable.
  • Page 82 Then consult discharge paper under low ambient Pantum support center. It may causes the fire or the area temperature) electric shock if you continue to use the printer under this situation.

  • Page 83: Image Defects

    10.2.2. Image Defects Trouble Cause Solution • Toner is low. • The print media does not meet usage specification, such as the • Please properly use the print media within media is damp or too rough. the specification range. • The resolution in the print program •...
  • Page 84 • Clean the laser toner cartridge or replace it • The internal part of the laser toner with a new one. • Please contact Pantum Customer Service cartridge is damaged. • The fuser component is damaged. to repair and replace the fuser component.
  • Page 85 • The laser toner cartridge is installed incorrectly. • The internal part of the laser toner • Ensure to install the cartridge correctly. cartridge is damaged. • Abnormal charge inside the printer; the laser toner cartridge is Whole page dark not charged.

  • Page 86: Product Specification

    11. Product Specification 11.1. P2200/P2500 Series Specification • Specification values are slightly different for different models of printers with different Note: functions. These values are based on the initial data. For more information about the latest specification, please visit: http://www.pantum.com.

  • Page 87: Printing Specification

    11.1.2. Printing Specification 20/22ppm Print Speed Letter 21/23ppm First Page Print Time 7.8s Print Language Maximum print size Legal (216mm*355.6mm) Paper Input Standard Tray 150 pieces (80g/m² ) Capacity Paper Output Print-side down 100 pieces (80g/m² ) Capacity Plain paper, thin paper, thick paper, transparent film, card paper, Media Type label paper, envelope A4, A5, JIS B5, IS0 B5, A6, Letter, Legal, Executive, Folio, Oficio,...

  • Page 88: P2600 Series Specification

    11.2. P2600 Series Specification • Specification values are slightly different for different models of printers with different Note: functions. These values are based on the initial data. For more information about the latest specification, please visit: www.pantum.com 11.2.1. Specification Overview Processor 600MHz Memory 64MB/128MB 220V Model: AC 220-240V, 50/60Hz, 3.0A...

  • Page 89: Printing Specification

    11.2.2. Printing Specification 24ppm Print Speed Letter 25ppm First Page Print Time < 8.5s Print Language Maximum print size Legal (216mm*355.6mm) Standard Tray 150 pieces (80g/m² ) Paper Input Capacity Multipurpose Tray 1 piece (60~163g/m² ) Paper Output Print-side down 100 pieces (80g/m²...
  • Page 90 Unique Identifier Trade Name: Pantum Model No.: P2*****(suffix *: A-Z, 0-9, hyphen or blank) Responsible Party – U.S. Contact Information Company Name: PANTUM (USA) CO.,LTD Office address:13875 Ramona Ave.,Chino, CA 91710 TEL: 626-965-6662 FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This manual is also suitable for:

P2200 seriesP2600 series

Table of Contents