Table of Contents
Advertisement
Instrument/Accessory
Connector Interfaces
Plastic Cap
Agilent 81632B/3B/4B/6B/7B Power Sensor Modules and Agilent 81635A Dual Power Sensor Module, First Edition
Table 6
Required Equipment8164B
Recommended Model
Agilent 81000AI (4 each)
Agilent 81000FI (3 each)
Agilent 81000SI (4 each)
PN 5040-9351
Legend:
Test Record
Results of the performance test may be tabulated on the Test Record
provided at the end of the test procedures. It is recommended that you
fill out the Test Record and refer to it while doing the test. Since the
test limits and setup information are printed on the Test Record for
easy reference, the record can also be used as an abbreviated test
procedure (if you are already familiar with the test procedures). The
Test Record can also be used as a permanent record and may be
reproduced without written permission from Agilent Technologies.
Test Failure
If the Agilent 81632B/3B/4B/6B/7B/5A fails any performance test,
return the instrument to the nearest Agilent
TechnologiesSales/Service Office for repair.
Instrument Specification
Specifications are the performance characteristics of the instrument
that is certified. These specifications, listed in "Specifications" on
page 17, are the performance standards or limits against which the
Agilent 81632B/3B/4B/6B/7B/5A can be tested. "Specifications" on
page 17 also lists some supplemental characteristics of the Agilent
81632B/3B/4B/6B/7B/5A. Supplemental characteristics should be
considered as additional information.
2B 3B 4B
5A
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
-
not applicable
x
necessary
o
optional
8163xA
Required
Character-
6B 7B
istics
x
x
x
x
x
x
x
x
Alternative
Models
31
Advertisement
Table of Contents
