BenQ VL3735 Service Manual page 82

PART III INSPECTION CRITERIA
3.1 Panel electrical inspection specification: (AUO panel)
Inspection Item
1 Line defect
2 Random dot defect
3 Total dots defect
4 Continuous defect
5 Neighboring Defects
6 Display scratch
7 Dust, stain, bubble
8 Polarizer scratch
9 Image sticking
10 Display Non - uniformity Not noticeable
11 Newton ring
12 Rubbing mark
13 Dim line
Note)
1. For pixel defect, one sub pixel is defined for one pixel.
Can't be seen.
Bright dot ≦ 0 dots
Dark dot ≦ 7 dots
≦7 dots
Two continuous bright dots ≦ 0 pairs
Three or more continuous bright dots( vertical, horizontal, oblique)
pairs
Two continuous dark dots ≦ 1 pairs
Three or more continuous dark dots (vertical, horizontal, oblique): 0 pair
Distance between 2 dark dots ≧ 5 mm
Refer to 3.2 Appearance specifications
Refer to 3.2 Appearance specifications
Refer to 3.2 Appearance specifications
The image sticking phenomenon should disappear within 45mins after
displaying any pattern continuously for 16hrs under 35degreeC/95%
Not noticeable
Not noticeable
Not noticeable
82
Specification
≦ 0