Table of Contents
Advertisement
Power: Press this key to turn ON/OFF power of TV set.
▲▼
Move highlight up and down on OSD to select desired function. These keys can be used to
select character at manual installation mode.
These keys can be used to select character at manual installation mode.
OK
Select/Enter highlight part on OSD.
Change input source in sequence.
Enter power saving function to select ECO, NORMAL and BRIGHT in sequence.
Enter picture mode to select Vivid, Standard, Sports or Personal Setting in sequence. Default
value is current mode.
Enter audio mode to select Mono or Stereo in sequence. Default is current mode.
Information display: Press this key to display Channel and Audio Type at upper right
position. If input is not TV, then display input source and audio type. Press again to exit
information display.
PIP/POP function ON/OFF: Press this key to operate PIP and POP function by following
sequential: PIP function ON → POP function (full screen POP) → PIP/POP function OFF
Every time press this key, display current aspect ratio on screen first then press again to go in
sequence. Aspect ratio is shown at middle bottom part of screen.
Default value is PIP function.
At PIP format, user can press function keys to adjust sub-picture position. And press OK to
swap main picture and sub-picture. All adjustment can be only done at main picture. Default
value of sub-picture is 1/4 size of input source.
At POP format, user can press OK to swap left and right pictures. All adjustment can be done
at right picture.
Dual language: Press this key to select Sound1, Sound2 and Sound3 in turns.
Rotate aspect ratio (Full Screen → 4:3 →16:9 → 14:9 → Super Fine Zoom)
43
Advertisement
Table of Contents
