Table of Contents
Advertisement
(3) Auto Up-date Installation
The TV will be able to search automatically for new stations.
(4) Direct Frequency Access
The user can attempt to tune the set on a station by directly entering the frequency, if
known.
(5) Manual Installation
In a pre-set transmission standard, the user has the possibility to search for a
particular station at any Tuner accessible frequency. This is particularly useful if a new
station is being broadcasted and the user wants only to add it without launching the
auto installation or auto update again. The search will start from the current program
frequency.
(6) Fine Tuning
The user has to be able to finely adjust the frequency of the tuner in order to improve
the received picture and sound if necessary.
(7) Decoder Selection
In manual installation, the user has the option to select for each RF Program if there is
a Decoder/Descrambler connected to SCART. When the decoder option is selected, the
tuner receives the program but the SCART is displayed if the pin8 is high.
2.5 Component Video Signal
2.5.1 Connector pin definitionComponent video pin define :
(1)
(2)
(1) Cr/Pr Input
(2) Cb/Pb Input
29
(3)
Advertisement
Table of Contents
