BenQ VL3735 Service Manual page 20

Hide thumbs Also See for VL3735:
Table of Contents

Advertisement

720p
1080i
1080p
2.1.7 Power management
DPMS mode power consumption: under 15 W.
2.1.8 HDMI certification
(1) Must be compliance of HDMI1.0 compliance test by ATC (Matsushita or Silicon
Image) to get HDMI logo.
(2) HDCP implementations for HDMI shall adhere to HDCP specification version 1.1.
2.1.9 Firmware Upgrade
System firmware and DTV module firmware can be upgraded through D-SUB 15
connector via special convert cable. This convert cable is provide the function of convert
D-DUB 15 cable to D-SUB 15 (PC signal) and D-SUB 9 (UART signal). If customer needs
central control function, he also needs this convert cable to separate the PC signal and UART
signal by different cable.
2.2 SCART Video Signal (AV1, AV2)
2.2.1 AV1/AV2 SCART pin define & signal level
This 21 pin input/output connector confirms to the "Cenelec SCART" specification.
1280x720p
16:9
1920x1080i
16:9
1920x1080p
16:9
20
50
861A
50
861A
50
861A
HDTV
HDTV
HDTV

Advertisement

Table of Contents
loading

Table of Contents