Table of Contents
Advertisement
No
3.12 Finishing of piece parts will not arrived in good condition at the customer
3.13 The step between the plastic>1.0 mm
3.14 Gap between other plastic parts is over spec (refer to PS1)
3.15 Wiring or fixing cord comes out of cabinet or jammed
3.16 Auxiliary material used during production not removed
3.17 Cabinet parts come loose during normal handling, not safe
3.18 Cabinet parts come loose during normal handling, but safe
3.19 Tilt/swivel too flexible/not working
3.20 Tilt/swivel stiff
3.21 Dirty front bezel and housing can't remove
3.22 Dirty front bezel and housing removable easily
3.20 Sticker or loose user control switch which will not function correctly
3.21 Missing knob or switch, not safe
3.23 Missing knob or switch, but safe
3.24 Poor functional user controls in mechanical
3.25 Unreadable printing of user controls label
3.26 Rubber foot missing
3.27 LED wrong material or missing
3.28 Wrong S/N between spec. Label and monitor display
4
AC power and signal cable
4.1 AC power or connector not correct or damaged, not safe
4.2 AC power or connector not correct or damaged, but safe
4.3 Signal cable contact pin dirty
4.4 Signal cable plug dirty or surface damaged, but safe
4.5 Cable crack
4.6 Cable scratch (wire not exposed), or dirty
4.7 AC-DC adapter no function
4.8 Signal cable contact pin dirty
5
Interior of the product
5.1 Use Non-QVL (Qualify vendor list) component
5.2 Wrong parts, broken component, but safe
5.3 Foreign material
Conductive (Has potential to short circuit)
Non-conductive (Moveable)
5.4 Missing hardware, component or screw, stripped screw
5.5 Loose hardware/screw or insufficient torque
Description
72
Class
Major
Major
Major
Major
Major
Critical
Major
Major
Minor
Major
Minor
Major
Critical
Major
Major
Major
Major
Major
Major
Critical
Major
Major
Minor
Major
Minor
Major
Major
Major
Major
Critical
Major
Major
Major
Advertisement
Table of Contents
