Table of Contents
Advertisement
C) Test method:
1)Sample & Sensor
Contents
Jig
Sensor
2) Method:
a)Operating the product under normal condition to check:
*Performance
*Appearance & mechanical structure.
b)Check for any problem in electric operation & mechanical structure after carry out
test under each condition.
c)The LCD defect is not a mandatory cause of failure.
D) Inspection:
a)The data shall basically meet the allowance of the original data before test. Any
defect in the data , It shall be rejected as failure.
b)Any electric or mechanical defect after test ,it shall be rejected as a failure,the
corrective action shall be taken.
c)Test Data: Please refer to attachment( ).
1.3 Packaging Configuration
1.3.1 Container Specification
40' container dimension: 11900*2280*2080(L*W*H)(in size)
20' container dimension: 5840*2280*2080(L*W*H)(in size)
1.3.2 Carton Specification
Carton Dimension (W *H * D):
1.3.3 Pallet Specification
Pallet size: 1140*990*120mm
1.3.4 Container carry capacity
40' 144 SETS;
20' 60 SETS
Half sine
Needs Jig to fix it.
Attached to the center point of LCD TV
front side.
1130 X 889 X 330
13
Advertisement
Table of Contents
