Level 2 Service Manual
Removing and Replacing the Rear Speaker
6881040B85
1.
Remove the rear housing cover, battery, antenna, endo housing, and rear endo
housing as described in the procedures.
2.
Use metal tweezers to unlatch the three metal clips that secure the rear
speaker to the rear endo housing as shown in Figure 11.
3.
Carefully remove the rear speaker out of its socket in the rear endo housing.
Avoid damage to the rear speaker clips and speaker elastomer.
Figure 11. Removing the Rear Speaker
4.
To replace, peel off any adhesive protective covering and carefully press the
speaker into position.
5.
Ensure that the speaker elastomer is correctly aligned or the speaker will not
function.
6.
Replace the front endo housing, endo housing, antenna, battery, and rear
housing cover as described in the procedures.
July 19, 2002
Disassembly
020448o
23