Level 2 Service Manual
Programming: Software Upgrade and Flexing
Programming: NAM Programming
6881040B85
Contact your local technical support engineer for information about equipment and
procedures for flashing and flexing.
Follow this procedure to program the phone's telephone number.
1.
Enter Programming Mode:
Press #, enter the carrier System ID number, #, *,N.
2.
Enter the security code:
0,0,0,0,0,0 (factory default security code).
3.
Submit the security code:
Press OK (+).
Scroll using S to MIN (Mobile Identification Number).
4.
5.
Open the MIN display:
Press CHANGE (+).
6.
Use the Keypad to enter the 10-digit MIN.
7.
Store the new MIN:
Press OK (+).
8.
Exit Programming Mode:
Press DONE (+).
July 19, 2002
Troubleshooting
35