Removing And Replacing The Headphone Speaker Jack - Motorola V600 Service Manual

Digital wireless telephone level 1 and 2 service manual

Hide thumbs Also See for V600:

Table of Contents

Disassembly

Removing and Replacing the Headphone Speaker Jack

Remove the battery cover, battery, SIM, antenna, and rear housing as

described in the procedures.

Using the disassembly tool, gently pry up on the headphone speaker jack to

remove it from the rear housing as shown in Figure 11. Be careful not to damage

the leads.

Figure 11. Removing the Headphone Speaker Jack

To replace, align the headphone speaker jack to the rear housing assembly.

Insert the top end of the headphone speaker jack into the rear housing

assembly.

Press the bottom end of the headphone speaker jack into the rear housing. Be

careful not to damage the headphone jack speaker leads.

Ensure headphone jack speaker leads will contact the transceiver board when

reassembled.

Replace the rear housing, antenna, SIM, battery, and battery cover as

described in the procedures.

October 10, 2003

Rear Housing Assembly

Headset Jack

V600

6809468A79-O

Table of Contents