Getting Started; Board Diagram - Texas Instruments DRV2604EVM-CT User Manual

Getting Started

1 Getting Started
The DRV2604 can be used as a demonstration or evaluation tool. When the DRV2604EVM-CT evaluation
module is powered on for the first time, a demo application automatically starts. To power the board,
connect the DRV2604EVM-CT to an available USB port on your computer using the included mini-USB
cable. The demo begins with a board power-up sequence and then enters the demo effects mode. The
four larger buttons (B1–B4) can be used to sample haptic effects using both the ERM and LRA motor in
the top right corner. The two smaller mode buttons (–, +) are used to change between the different banks
of effects. See the
application.
USB Power
Power Select Pins
External
Power
AUDIO
Analog-In
Programmer
Connector
4
DRV2604 ERM, LRA Haptic Driver Evaluation Kit
DRV2604 Demonstration Program
DRV2604 Actuator Disconnect
MSP
DRV
MSP430
DRV2604
Effect Buttons
Press to play haptic effects.
Figure 2. Board Diagram
Copyright © 2013, Texas Instruments Incorporated
section for a more detailed description of the demo
Increment Mode
Decrement Mode
OUT
JP4
JP3
www.ti.com
ERM and LRA Actuators
Actuators
SLOU355 – March 2013
Submit Documentation Feedback