Chapter 2 General Operation Description; Backlight Function; Weighing Mode; Units Selection - Excell GTW User Manual

EXCELL PRECISION CO., LTD.

Chapter 2 General Operation Description

2-1 Backlight Function

Press key to select the display backlight mode:
.
.
.

2-2 Weighing Mode

2-2-1 Units Selection

1. After indicator is turned on, use
the screen indicated.
2. The selected unit will be memorized when you turn the indicator off. And the
memorized unit will appear after you turn on the indicator next time.

2-2-2 Check Weighing Mode

1. Preset " High limit", "Low limit" and " Beeper value" operation
Use and
For example:
Preset "Low limit" ( Low limit >10d )
Press
Press
Press
Press
Preset "High limit" ( High limit ≥ Low limit )
Press
Press
Press
Press
Press
Press
Preset "Beeper value" ( Refer to Note )
02018058
⇒ "Auto Backlight" mode. When the weight is over 10d or any key is
pressed, the display backlight will be switched on. When the weight
returns to zero (the weight on platform is less than 10d), the display
backlight will switch off after 10 seconds.
⇒ Display backlight is on all the time.
⇒ Display backlight is off.
key to preset values.
e.g. Low limit = 20 kg
key the display shows
key 1 time the display shows
key 2 times the display shows
key 4 times the display shows
key 1 time the display shows
key 1 time the display shows
key 2 times the display shows
key 1 time the display shows
key 5 times the display shows
key 3 times the display shows
key to select a unit from kg, lb, tael or viss, as
e.g. High limit = 25 kg
e.g. Beeper value = 22
8
.
.
.
.
.
.
.
.
.
.
ZSME300000264