Hold Function Settings - Excell FJ5 Service Manual

EXCELL PRECISION CO., LTD.

2-1-4 Hold Function Settings

Press key
TARE
Press key
TARE
= Manual hold
Press the
the hold function.
= "Peak hold" mode 1
The scale shows and holds the maximum weight value detected from the
continuously changing weight. Press any key to exit the hold function.
= "Peak hold" mode 2
The scale shows and holds the maximum weight value detected from the
continuously changing weight. The scale exits the hold mode automatically
after removing the weight or if reducing the weight value is less than 10d.
= "Manual hold + Stable hold" mode 1
After the scale is stable, the display shows and holds the current weight
value. Press any key to exit the hold function.
= "Manual hold + Stable hold" mode 2
After the scale is stable, the display shows the current weight value. The
scale exits the hold mode automatically after removing the weight or if the
weight value is less than 10d.

Setting is only available for non-approval models.
45046
LCD displays the current configuration
Use
MODE
Default setting = 0
0  Manual hold
1  "Peak hold" mode 1
2  "Peak hold" mode 2
3  "Manual hold + Stable hold" "mode 1
4  "Manual hold + Stable hold" "mode 2
MODE  Upward digit selecting (0-9)
HOLD  Downward digit selecting (9-0)
ZE RO  No function
TA RE  Confirm
key to hold the weight value, and press any key to exit
HOLD
16
or key to enter a parameter
HOLD
ZSME300000343