Hold Function Settings - Excell HJW User Manual

EXCELL PRECISION CO., LTD

2-1-6 Hold Function Settings

 This function is not available for OIML or NTEP approval models.
Press key
TARE/PT
Use or key to
MC UNIT
key in the parameters
Press key
TARE/PT
MC key  Upward key (0~ 9 digit entry )
UNIT key  Downward key (0,9~1 digit entry)
= Hold function disabled
= "Peak hold" mode
The scale keeps displaying the maximum weight when the weight is continually
changing. Press any key to exit this mode.
= "Stable hold 1" mode
When the weight is stable, the LCD shows the current weight value. Press any
key to exit this mode.
= "Stable hold 2" mode
When the weight is stable, the LCD shows the current weight value. When the
weight returns to zero (<10d), the hold mode is cancelled automatically.
"Animal scale hold" mode
=
When the scale returns back to zero, the display shows " - - - - - - ". After the animal or object is
on the platter and the scale becomes stable, the display shows the weight value and hold.
Then when the animal or object is off the platter, the display shows " - - - - - - " (or the weight is
less than 10e) and the hold function is off. If the scale is hardly stable when the animal is on
the platter, the scale shows the average weight in 10 seconds and holds the status.
02022010
Hold function setting
LCD displays the last parameter setting
Hold function setting
Use or keys to key in the
MC UNIT
parameters

Default setting = 0
0  Hold function disabled
1  "Peak hold" mode
2  "Stable hold 1" mode
3  "Stable hold 2" mode
4  "Animal scale hold" mode
TARE/PT key  Move cursor rightward
NET/GROSS key  Move cursor leftward
17 ZSME300000197