Section Twelve Wiring Diagram (Maintenance Instructions) - Infinity 890 FL Owner's Manual


Re-assemble in reverse order.
REPLACEMENT OF OXY-PILOT ASSEMBLY
NOTE: If the pilot assembly is replaced it must be replaced by an identical unit from the same manufacturer and
replaced as a complete unit.

Follow the burner tray removal sequence.

Undo the compression nut on the supply pipe at the pilot.

Carefully pull off the ignition lead.

Disconnect the thermocouple at the end of the main control valve.

Remove the cross headed nut holding the pilot to the chassis

Carefully remove the pilot shield & oxy-pilot.

Re-assemble in reverse order.
REPLACEMENT OF CONTROL UNIT (EDB)

Follow the burner tray removal sequence.

Disconnect leads from control unit and remove 1nut, bolt, and washer.

Re-assemble in the reverse order.
Turn on the gas supply, check for gas soundness and re-commission appliance.
SECTION TWELVENE Wiring Diagram (maintenance instructions)
24
Attach to
the valve
LT5845 (ISS 15)