Lamborghini Caloreclima ALHENA C Instructions For Use, Installation And Maintenance page 280

To open the boiler casing:
1. Undo the screws "1" (see fig. 47).
2. Pull the panel outwards and lift it.
On this unit, the casing also acts as a sealed chamber.
B
After any operation involving opening the boiler, care-
fully check the correct refitting of the front panel and
its seal.
Proceed in reverse order to refit the front panel. Make sure it is correctly hooked to the upper fa-
stenings and is correctly positioned at the sides. Once the screw "1" is tightened, the head must
not be below the lower reference fold (see fig. 48).
1
OK
280 EN
1
fig. 47- Front panel opening
1
fig. 48- Correct position of front panel
cod. 3540000251 - Rev. 00 - 03/2024
ALHENA C
3
2
1
NO