Quectel RG255C-GL Hardware Design page 13

Mini pcie module
Table of Contents

Advertisement

AT Commands
Internet Protocol Features
USB Tethering
SMS
(U)SIM Interface
UART
Audio
Features*
PCM
Interface*
USB Interface
Physical Characteristics
Temperature Range
Firmware Upgrade
5
To meet the normal operating temperature range requirements, it is necessary to ensure effective thermal dissipation,
e.g., by adding passive or active heat sinks, heat pipes, vapor chambers. Within this range, the module's indicators comply
with 3GPP specification requirements.
6
To meet the extended operating temperature range requirements, it is necessary to ensure effective thermal dissipation,
e.g., by adding passive or active heat sinks, heat pipes, vapor chambers. Within the extended temperature range, the
module remains the ability to establish and maintain functions such as voice, SMS, and data transmission, without any
unrecoverable malfunction. Radio spectrum and radio network are not influenced, while one or more specifications, such as
P
, may exceed the specified tolerances of 3GPP. When the temperature returns to the operating temperature range, the
out
module meets 3GPP specifications again.
RG255C-GL_Mini_PCIe_Hardware_Design
Compliant with 3GPP TS 27.007, 3GPP TS 27.005
Quectel enhanced AT commands
Supports TCP/UDP/SSL*/TLS*/FTP(S)*/HTTP(S)*/MQTT(S)*/SMTP(S)*/
NTP*/PING/NITZ*/LwM2M*
RmNet, RNDIS, ECM, DUN, MBIM
Only Support SGS, IMS and NAS SMS
Text and PDU modes
Point-to-point MO and MT
SMS cell broadcast
SMS storage: ME by default
Supports (U)SIM card: 1.8/3.0 V
Main UART:
Supports RTS and CTS hardware flow control
Baud rate: 115200 bps by default
Used for AT command communication and data transmission
Supports one digital audio interface: PCM interface
LTE: AMR/AMR-WB
Supports echo cancellation and noise suppression
Supports 16-bit linear data format
Supports long frame synchronization and short frame synchronization
Supports master and slave modes, but must be the master for long
frame synchronization
Compliant with USB 2.0 specification (slave mode only), with
transmission rates up to 480 Mbps
Used for AT command communication, data transmission, firmware
upgrade, software debugging and GNSS NMEA output
Supports USB serial drivers: Windows 7/8/8.1/10/11, Linux 2.6–6.5,
Android 4.x–13.x
Size: 50.95 mm × 30.0 mm × 4.95 mm
Weight: TBD
Operating temperature range: -35 to +75 ° C
Extended temperature range: -40 to +80 ° C
Storage temperature range: -40 to +90 ° C
USB 2.0 interface or
DFOTA*
protocols
5
6
5G Module Series
12 / 57

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents