Installing The Battery Connector; System Board; Removing The System Board - Dell Latitude 14 Rugged - 5414 Owner's Manual

3. To remove the battery connector:
a. Disconnect the battery connector cable [1].
b. Remove the screws that secure the battery connector [2].
c. Lift the battery connector [3].

Installing the battery connector

1. Place the battery connector on the system board.
2. Tighten the screws to secure the battery connector to the computer.
3. Connect the battery connector cable.
4. Install the:
a. I/O board
b. base cover
c. optical drive
d. hard drive
e. battery
5. Follow the procedure in

System board

Removing the system board

1. Follow the procedure in
2. Remove the:
a. battery
b. hard drive
c. optical drive
44
After working inside your
Before working inside your
computer.
computer.