Table of Contents
Advertisement
c.
optical drive
d.
battery
8. Follow the procedure in
Battery connector
Removing the battery connector
1. Follow the procedure in
2. Remove the:
a.
battery
b.
hard drive
c.
optical drive
d.
base cover
e.
I/O board
3. To remove the battery connector:
a. Disconnect the battery connector cable [1].
b. Remove the screws that secure the battery connector [2].
c. Lift the battery connector [3].
Installing the battery connector
1. Place the battery connector on the system board.
2. Tighten the screws to secure the battery connector to the computer.
3. Connect the battery connector cable.
4. Install the:
a.
I/O board
b.
base cover
c.
optical drive
d.
hard drive
e.
battery
44
Disassembly and reassembly
After working inside your
Before working inside your
computer.
computer.
Advertisement
Table of Contents
