Installing The Camera; Touchscreen Controller Board; Removing The Touch Screen Controller Board - Dell Latitude 14 Rugged Extreme Owner's Manual

Hide thumbs Also See for Latitude 14 Rugged Extreme:
Table of Contents

Advertisement

Installing the camera

1.
Align and insert the camera into the slot on the display panel.
2.
Install the screws that secure the camera to the display panel.
3.
Connect the camera cable connector to the camera board.
4.
Install the:
a.
display panel
b.
battery
5.
Follow the procedure in

Touchscreen controller board

Removing the touch screen controller board

1.
Follow the procedure in
2.
Remove the:
a.
battery
b.
display panel
3.
To remove the touch screen controller board:
a. Peel the adhesive tape from the touch screen controller board [1].
b. Disconnect the touch screen controller board cable[2].
c. Remove the screw that secures the touch screen controller board to the display panel [3].
d. Lift and remove the touch screen controller board from the computer [4].
62
After working inside your
Before working inside your
computer.
computer.

Advertisement

Table of Contents
loading

This manual is also suitable for:

7414

Table of Contents