Fingerprint reader
Removing the fingerprint reader board
1.
Follow the procedure in
2.
Remove the:
a.
battery
b.
hard drive
or
SSD
c.
base cover
d.
ExpressCard
3.
To remove the fingerprint reader:
a. Remove the screws that secure the fingerprint reader cover [1].
b. Lift the cover and remove it to expose the fingerprint reader board [2].
c. Lift the release tab and disconnect the fingerprint reader cable [3, 4].
d. Lift and remove the fingerprint reader board from the computer [5].
Installing the fingerprint reader board
1.
Insert the fingerprint reader board into the slot on the computer.
2.
Connect the fingerprint reader board cable to the connector.
3.
Secure the metal cover to fingerprint reader board by using the screws.
4.
Install the:
a.
ExpressCard
b.
base cover
c.
hard drive
d.
battery
5.
Follow the procedure in
38
Before working inside your
After working inside your
computer.
computer.