Installing The Wwan Card; Rf Cable Holder; Removing The Rf Cable Holder - Dell Latitude 14 Rugged Extreme Owner's Manual

b. base cover
3. To remove the WWAN card:
a. Disconnect the antenna cables from the WWAN card [1].
b. Remove the screw that secures the WWAN card [2].
c. Slide the card out of the card connector on the system board and remove it [3].

Installing the WWAN card

1. Insert the WWAN card into the connector on the system board.
2. Press the card down and install the screw that secures the WWAN card.
3. Connect the antenna cables on the WWAN card.
4. Install the:
a. base cover
b. battery
5. Follow the procedure in

RF cable holder

Removing the RF cable holder

1. Follow the procedure in
2. Remove the:
a. battery
b. hard drive or SSD
c. optical drive
d. base cover
e. GPS board
f. WLAN card
g. docking board
3. To remove the RF cable holder:
a. Unroute the antenna cables from the cable routing clips [1].
42
After working inside your
Before working inside your
computer.
computer.