XiNCOM Twin WAN XC-DPG502 User Manual page 95

Twin WAN Series – User Guide | v1
Restoring a saved configuration
Once you have updated the firmware, you can upload a previously saved configuration to
the Twin WAN Gateway.
To upload a previously saved configuration:
1. Open the TFTP utility by double clicking on the TFTP executable file (tftp.exe).
2. Enter the Gateways IP address (Default is: 192.168.1.1)
3. Click the Browse button and select the configuration file.
4. Click the Download button. It could take up to 1 to 3 minutes to upload the
firmware. The Gateway will reboot thereafter.
Example of how to upload a previously saved configuration.
HTTP Upgrade Firmware
The Upgrade Firmware Screen within the Twin WAN Gateway's setup console allows
you to upgrade firmware or backup system configuration by using HTTP upgrade.
You can backup your system configuration by press "save" button of Save
System Configuration. It will save the system configuration for you. ( Notice:
You have to refresh the browser after you saved the system configuration file.)
You can also do firmware upgrade by inputting the correct password and the
file name of your firmware. DO NOT Reset or Restart the device while
updating to any new firmware. Any interruption to the uploading of firmware
may result in a system failure.
Copyright © 2005 WINS International, LLC dba XiNCOM | All rights reserved.
94