Configuring Other Routers On Your Lan - XiNCOM Twin WAN XC-DPG502 User Manual

Twin WAN Series – User Guide | v1
Note
If there is an entry or entries in the Routing table with an Index of zero (0), these are
System entries. You can not modify or delete these entries.

Configuring other Routers on your LAN

All traffic for devices not on the local LAN must be forwarded to the Twin WAN
Gateway so that they can be forwarded to the Internet. This is done by configuring other
Routers to use the Twin WAN Gateway as the Default Route or Default Gateway, as
illustrated by the example below:
Configuration settings for the LAN shown with 2 routers and 3 LAN segments, the Twin
WAN Gateway requires 2 entries as follows: (see following page)
Copyright © 2005 WINS International, LLC dba XiNCOM | All rights reserved.
34