XiNCOM Twin WAN XC-DPG502 User Manual page 39

Twin WAN Series – User Guide | v1
The Custom Virtual Server console allows you to define your own Server types. This is
for situations when the desired Server type is not listed on the Virtual Server screen.
Custom Virtual Server - Settings
Select Custom Server Name
Use this field to select any defined Custom Virtual Servers. To edit an existing entry,
select it, and then click the Select button. The screen will update with data for the selected
entry.
Custom Server Configuration
Server Name – Enter a suitable name for this server.
State – Use this to Enable or Disable the server.
Server IP – Enter the IP address of the PC on you LAN which is running the
required Server software. Each PC should have a fixed IP address or have a
reserved IP address. (See the Host IP section earlier in this Chapter for details on
reserving an IP address). Each PC must be running the appropriate Server
software.
Protocol Type – Select the network protocol used by this sever type.
LAN Port Range – Enter the range of port numbers used for outgoing traffic
from this Server. If only a single port is required, enter it in both fields.
Copyright © 2005 WINS International, LLC dba XiNCOM | All rights reserved.
Figure 12. Custom Virtual Servers
38