XiNCOM Twin WAN XC-DPG502 User Manual page 54

Twin WAN Series – User Guide | v1
Filter Setting
Select the desired option for this Group:
No Filtering - No traffic is blocked; Internet access is not restricted.
Block All Access - All traffic is blocked; Internet access will not be available.
Block Selected Items - Any traffic items selected on this console are blocked.
You can restrict well known services or define your own filters.
Block Well Known Ports
Select the services you wish to block. The current group will not be able to use any
services that are checked.
User-Defined Ports to Block
This section of the Access Filter console is optional. Use this to define your own custom
filters. For each customized filter, the following information is required:
Name - Enter a name for this customized filter.
TCP/UDP Packets - Select either TCP or UDP, depending on which protocol is
used by the service you want to block.
Port No. Range - Enter the range of port numbers used by the service you want
to block. If only a single port is required, enter it in both fields.
Copyright © 2005 WINS International, LLC dba XiNCOM | All rights reserved.
53