XiNCOM Twin WAN XC-DPG502 User Manual page 94

Router or gateway

Hide thumbs Also See for Twin WAN XC-DPG502:

Table of Contents

Twin WAN Series – User Guide | v1

Uploading the Firmware

Using the TFTP utility you are able to update the firmware on the Twin WAN Gateway.

This is useful when you also need to recover the Gateway from a configuration failure.

To upload firmware to the Twin WAN Gateway:

1. Open the TFTP utility by double clicking on the TFTP executable file (tftp.exe).

2. Enter the Gateways IP address (Default is: 192.168.1.1)

3. Enter a file name that you would like to save the file as (Example: config-

file.bin).

4. Click the Download button. It could take up to 1 to 3 minutes to upload the

firmware. The Gateway will reboot thereafter.

Example of uploading a firmware into the Twin WAN Gateway.

Note:

If you are currently using Firmware Release 23 or earlier, you will first need to update to Version

27. Upon the successful upload of Version 27, you may then upload to the latest firmware.

Omitting this procedure will result with PID mismatch error message. This applies to all models

of the Twin WAN Series.

Table of Contents

Need help?

Do you have a question about the Twin WAN XC-DPG502 and is the answer not in the manual?