XiNCOM Twin WAN XC-DPG502 User Manual page 42

Twin WAN Series – User Guide | v1
Outgoing Protocol
Select the protocol used by this application when sending data to the remote
server or PC.
Outgoing Port Range
For data being sent, enter the beginning and end of the range of port numbers used
by the application server. If the application uses a single port number, enter the
range in both fields.
Incoming Protocol
Select the protocol used by this application, when receiving data from the remote
server or PC.
Incoming Port Range
For data being recieved, enter the beginning and end of the range of port numbers
used by the application server. If the application uses a single port number, enter
it in both fields.
Buttons
•
•
•
•
Special Application List
This list shows details of all Special Applications which are currently defined.
Using a Special Application on you PC
•
Once the Special Applications console is configured correctly, you can use the
application on your PC normally. Remember that only one (1) PC can use each
Special application at any time.
•
When 1 PC is finished using a defined special application, there may need to be a
Time-out period before another PC can use the same special application.
•
In the event a defined special application will not function correctly, use the DMZ
feature if required.
Copyright © 2005 WINS International, LLC dba XiNCOM | All rights reserved.
Add – Create a new Special Application entry.
Delete – Delete the selected entry.
Update – Save any changes you have made to the current entry.
Cancel – Cancel any changes you have made since the last save
operation.
41