XiNCOM Twin WAN XC-DPG502 User Manual page 61

Twin WAN Series – User Guide | v1
Force Deletion after Expiry -
Once Security Association is expired, the tunnel session will be removed and
related resources will be cleared from memory when enabled.
Log Level
This function allows you to select the amount of information you would like to see on the
VPN log. The lowest lever will show the least information and the highest level will
show the most. The VPN log has six different levels of analysis:
• None
• Critical
• Error
• Warning
• Information
• Debug
If you set the log level to Error, this will display messages tagged as Error as well as
Critical. Setting the log level to Debug will display messages tagged as Critical, Error,
Warning, Information and Debug.
Critical -
This level will log major malfunctions. Critical entries that show up in the log
guaranties mean that the tunnel/VPN is not functioning. The most likely cause of
these messages is improper configuration in the Global Settings (major).
Error -
This log level will display messages that result in a failed operation such as tunnel
unable to establish or failed packet transmissions. The most likely cause of these
messages is improper configuration of the tunnel in the Policy Setup (major).
Warning -
This log level displays potential issues that may result in an Error or a Critical
Error. The most likely cause of messages tagged as Warning is improper
configuration in the Global Settings (minor) or Policy Setup (minor). You may
also get Warning messages when you approach the hardware limit of this device.
Information -
The messages tagged as Information display the actions the VPN gateway is
taking. This level allows you to troubleshoot common problems with VPN tunnels
not establishing and other various problems. This level is selected by default.
Debug -
This level displays the most information and is used by developers to troubleshoot
various problems. If you are experiencing problems with the device and contact
support, you may be asked to record the log with log level set to Debug.
Copyright © 2005 WINS International, LLC dba XiNCOM | All rights reserved.
60